mandag 25. mars 2013

A fairy in a bell jar - with tutorial

As a part of the design team at Hobbykunst, I got a Glass Ornament from Meslissa Francis and was asked to make something out of it.


I made a small "fairy in a bottle". The grass, base and the mushroom is decorated with old book pages. The little fairy boy is cut out from an old book. The fairy wings and butterflies are from Kort og Godt. The cut flower and small fairy in the grass are from an old Graphic 45 paper, Once Upon a Spring Time. 



Around the edge of the glass, I have glued a lace. The glass has a simple circular cardboard as base. This kind of base is not ideal to make 3D crafts om - so I made my own base. I have added the tutorial and templates for my base.  



_________________________________________________________  


Templates and Copyright - Please read.

This is my own template. You are free to use my templates, and publish your own craft. However, it would be nice if you link back to me. Please do not sell or publish my templates, as they are or edited! My templates are copyrighted by law.


Dette er min egen mal. Du kan fritt bruke malen til å lage dine egne arbeider. Du kan også fritt publisere ditt eget arbeide. Jeg ville imidlertid satt pris på om du linket tilbake til meg. Du har ikke lov til å publisere eller selge mine maler, som de er eller redigert. Mine maler har copyright under  Åndsverksloven.


_________________________________________________________  


Template: 

(Click on the picture to get a larger version):



Tutorial:



1) Cut out the pieces. I have used 200g card stock for this base.
2) Use the small circle (top) and the 19 cm long rectangle. 
3) Glue on the flips on one side of the rectangle.
4) Glue the side to the top circle, you now have the start of a cylinder.
5) Use the ring, that the glass will sit on, and the 24 cm rectangle. 
6) Glue the side to the the ring.
7) Side glued to the ring
8) You have to sets for the base. Add some glue to the inside of the ring (not on the side, but on the inside of the ring itself)
9) Put the ring around the cylinder, and adjust the level of the ring - so the cylinder and the ring both touch the table. The base is starting to take form.
10) Turn the the base around.
11) Glue (the bottom) circle to the base. Make sure the flips from the inner circle are glued on the inside of the circle under the base, and the flips on the outside are glued on the outside of the circle under the base.
12) Glue the (decorative boarder under the base) to the bottom of the base.




Tutorial for the mushroom: 



13) Start with your base that you made above.
14) Take a piece of card (I have used 200g)
15) Role the card and glue together.
16) Make a hole in the base to fit the rolled card. I have decentered the hole, because I wanted the mushroom set to one side.
17) Put some glue in the hole and glue the rolled up paper.
18) Use a Styrofoam Egg (6cm).
19) Cut the top of the Styrofoam egg. You only need the top part of the egg for the mushroom
20) Make a hole inside the top of the styrofoam egg to fit the top of the rolled up paper. Add some glue to the hole.
21) Put the styrofoam piece on to the rolled card - and you have got a mushroom.




I am entering these challenges;


13 kommentarer:

  1. Fantastisk ide, og hvor er det bare flot lavet. Du er da helt suveræn lige for øjeblikket med alle de fantastiske ting, du laver her. Virkelig flot arbejde igen igen.

    SvarSlett
  2. Så utrolig flott dette var. Suuperkreativt. Du er bare dødsflink altså. Så utrolig inspirerende. ;-) Takk for at du deler.
    God Påske!
    Hilsen
    Beatrice

    SvarSlett
  3. Oooh My Goodness, what is this beautiful, stunning, gorgeous, and a tutorial how you made this! I enjoyd my visit here. thanks you so much for joining the anything goes challenge at Shelly's Images.

    Amanda
    Shelly's Images DT

    SvarSlett
  4. This is soooo cute! I LOVE it! Thank you so much for sharing your tutorial with us! I will have to say I LOVE that little mushroom!! I am going to have to make some of those!
    Thank you for sharing with us at Sugar Creek Hollow!
    Hugs
    Heather

    SvarSlett
  5. lovely creation, looks beautiful thanks for joining in with our challenge at CRAFT x carol

    SvarSlett
  6. Wow, a gorgeous project, love all the details. Thank you for joining us at SCH this week.
    Yvonne

    SvarSlett
  7. This is a fabulous project and very detailed tutorial.
    Thank you for joining us at Crafting for all Seasons.
    Pauline
    x

    SvarSlett
  8. Welcome to the "Make it Cute" Monday Challenge... Wow - what a great project! And the tutorial was frosting on the cake! Thank you for taking the time to do that!
    Good luck Kirsten!
    ~ginny
    Design Team - Craft Your Passions
    RubberMAD (http://ggetty.blogspot.com/)

    SvarSlett
  9. WOW what a precious creation! Thanks so much for joining our "ANYTHING GOES" challenge at Shelly's Images! Please come back and join us again real soon!!
    Darlene
    Shelly's Images Design Team
    SHELLY’S IMAGES BLOG
    DAR’S CRAFTY CREATIONS

    SvarSlett
  10. This is stunning. Thanks for sharing your fabulous project with us. Thanks for joining us this week at Craft Your Passion for our "Make It Cute" challenge.

    Anita
    DT CYP
    http://scrappyhappymommy.blogspot.ca

    SvarSlett
  11. Beautiful....I love the mushroom. So many beautiful details and what a great tutorial. The butterflies on the outside are such a beautiful touch. So happy you could join us this week at Sugar Creek Hollow this week.
    Patti SCH/DT

    SvarSlett
  12. A stunning creation.. and a fabulous tutorial!

    Thanks for sharing at Totally Gorjuss this time.

    Christine x

    SvarSlett
  13. Vakkert er ordet for alt det flotte du lager.

    SvarSlett

Related Posts Plugin for WordPress, Blogger...